Perforator Drivers

The PD1 ($480.00 to $530.00) is a controller board capable of driving up to 104/128 large coils, which make up the perforator machine.

PD1 perforator driver

The PD1 is a controller board capable of driving up to 104/128 large coils, which make up the perforator machine. It connects to the PC with its parallel printer port.

compatible with Wayne Stahnke's Punch software (freeware from author)
connects to printer port of PC
104 to 128 optically isolated outputs drive 50 volts, 2 amps (4 amps if modulated)
direct connections for a 6 or 8 wires unipolar stepper motor, with separate power
solid state relay for main motor
outputs switch to the negative of the solenoid power supply, (common positive)
output duty cycle control to reduce power during hold: after the solenoid has accomplished its move with full power, the current is reduced to 25% (adjustable). This feature can be disabled.
catch diode on every output to the positive of the solenoid power supply
trigger switch input, optically isolated, can be disabled

SPECIFICATIONS

	Minimum	Maximum
Logic voltage	9 volts	25 volts
Solenoid voltage		50 volts
Stepper motor voltage		25 volts
Output current - continuous		2 amps
Output current - 50% duty cycle		4 amps
Output current - 25% duty cycle		8 amps
Power relay current		5 amps
Power relay voltage		240 volts AC

Included

PD1 driver board
6 ft data cable
8 DB-25 female solder connectors
Software disk

Accessories

AD-9 power supply

Prices

PD1-104	480.00
PD1-128	530.00
AD-9	10.00

Configurations:

104 - 104 outputs
128 - 128 outputs

.
Please Note: All pricing in US Dollars.

For quantity pricing, contact us at info@midiator.com